...the fastest way to DWV transitions

Snap-All Increaser / Reducer Transition bushings from Clamp-All are the easiest and fastest way to make transitions between pipes of different diameters and/or materials.  From 3/4" copper to 10" hubless cast iron, clay, plastic or steel, Snap-All bushings take the hassle out of any DWV transition.

 

 

Snap-All transition bushings bring the advantages of a high strength shielded coupling to any DWV transition:

  • The outer grooves of the bushing nest into the HI-TORQ coupling gaskets or to other Snap-All bushings to provide an interlocking water tight, gas tight seal.

  • Bushings are one piece molded neoprene, the same high quality material used for HI-TORQ coupling gaskets.

  • Snap-All's unique design allows it to be used with either the Clamp-All HI-TORQ 80 or HI-TORQ 125 couplings.

  • Snap-All bushings are convenient.  Use them on one side or both sides of the coupling, for permanent or emergency installations.

  • Snap-All bushings are designed for use where pipes of different materials or sizes must be connected in DWV applications.  From 10" hubless cast iron, plastic, or steel pipe all the way down to 3/4" copper, every transition is easily made simply by nesting one size bushing into a coupling gasket or another bushing.

  • Snap-All bushings are adaptable in most DWV transition combinations.  There's no need to order or keep track of special reducing iron fittings.  Clamp-All couplings and Snap-All bushings make every transition hassle-free.

Snap-All Bushings . . . for reliable transition of materials

Selection of Snap-All bushings is easy.  Simply choose the bushing that fits inside the Clamp-All coupling being used.  For example, to reduce down from a 5" pipe to a 4" pipe, snap a #20054 bushing into a 5" coupling.  This simple transition is all that is required to join cast iron, plastic or steel pipe of two different diameters.  For smaller pipes, several bushings can be nested together to create the transition that is needed.  Bushing #20043 will nest inside the 5x4 bushing and receive 3" pipe.  Note that transitions to copper pipe must end with the specific bushing for that size copper.  Snap-All bushings part numbers 30022, 30033 and 30044 can be used to join extra heavy cast iron soil pipe to hubless pipe and fittings. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Engineering & Ordering Information...........................

    
               
 

Snap-All Part Number

Snap-All Bushing Size

A Diameter Fits Inside

 B Diameter Fits Outside      
  Clamp-All Coupling Snap-All Bushing Pipe Size Material      
  31575 1½ x ¾ cu 1½ 2 x 1½ ¾ Copper
  30151 1½ x 1 cu 1½ 2 x 1½ 1 Copper
  31512 1½ x 1¼ cu 1½ 2 x 1½ 1¼ Copper
  31515 1½ x 1½ cu 1½ 2 x 1½ 1½ Copper
  30215 2 x 1½ cu 2 3 x 2 1½ Copper
  20215 2 x 1½ 2 3 x 2 1½ CI, STL, PVC
  30022 2 x 2 cu 2 3 x 2 2 Copper, XHCI
  30032 3 x 2 cu 3 4 x 3 2 Copper      
  20032 3 x 2 3 4 x 3 2 CI, STL, PVC      
  30033 3 x 3 cu 3 4 x 3 3 Copper, XHCI      
  30043 4 x 3 cu 4 5 x 4 3 Copper      
  20043 4 x 3 4 5 x 4 3 CI, STL, PVC      
  30044 4 x 4 cu 4 5 x 4 4 Copper, XHCI      
  20054 5 x 4 5 6 x 5 4 CI, STL, PVC      
  20065 6 x 5 6 8 x 6 5 CI, STL, PVC      
  20086 8 x 6 8 10 x 8 6 CI, STL, PVC      
  20875 8 x 6 Clay 8 - 6 Clay      
  20108 10 x 8 10 - 8 CI, STL, PVC      
  21095 10 x 8 Clay 10 - 8 Clay      
     
  Nominal Outside Pipe Diameter    
  Pipe Size Hubless Steel Schedule SDR-35 Clay Copper    
    Cast Iron   40-80 PVC Plastic   DWV    
  1¼ - - - - - 1.375    
  1½ 1.90 1.90 1.90 - - 1.625    
  2 2.35 2.38 2.38 - - 2.125    
  3 3.35 3.38 3.38 - - 3.125    
  4 4.38 4.50 4.50 4.215 5.37 4.125    
  5 5.30 5.56 5.56 - 6.65 5.125    
  6 6.30 6.63 6.63 6.28 7.50 6.125    
  8 8.38 8.63 8.63 8.40 - -    
  10 10.56 10.75 10.75 10.50 - -    
 

Note:  All sizes in the charts are nominal inches

    
                   
                   
     
   
   
   
   
   
   
     
     
     
Copyright ©2010 Clamp-All Products, a NORMA Group Company