Clamp-All Couplings are quick and easy to install. Simply follow the instructions noted below. If you have any questions, give us a call.

Step 1 -The cut ends of the pipe should be smooth and square.

Step 2 - Place neoprene gasket on end of pipe or fitting until it is firmly seated against the center stop.

Step 3 - Place stainless steel housing with clamps on end of other pipe and slip the pipe into the gasket until it is also firmly seated against the center stop.

Step 4 - Slide the housing into position directly over the gasket. Using preset torque wrench, alternately tighten clamps to 80 in/lbs (9Nm) of torque.